**INSTALLATION GUIDELINES**

Proper installation of the benchtop is crucial, and we strongly advise reading this guide thoroughly before commencing the installation of any benchtop or wide laminated product.

The moisture content of timber fluctuates due to varying levels of moisture absorption and release. Natural humidity, air conditioning, and appliances that generate heat or moisture (e.g., dishwashers, cooking appliances) impact timber moisture content. As air moisture increases, timber expands, and it contracts as air moisture decreases.

Laminated timber products, being natural, will naturally expand and contract across the grain with humidity changes. This movement is normal and should be considered during installation (refer to Figure 3).

The extent of movement across the grain depends on the timber species, with a general rule of allowing 1mm per 100mm.

**SEALING**
Effective sealing is crucial to prevent sudden and excessive moisture changes within the timber. Envelope sealing is required for all laminated timber products—covering top, bottom, edges, and ends. Pay close attention to cutout areas and exposed end grain.

If on-site cutting is necessary after coating, reseal the cut area with a minimum of four coats of a suitable sealer.

**FIXING POSITIONS**
Minimal fixing is necessary, as the piece is primarily secured by its own weight and plumbing. Ideally, fix into the underside of the benchtop, along the same laminate length.

Refer to the provided diagrams for examples of correct and incorrect fixing positions.